Skip to main content

Cybotix NZ

Quick answer: In the LiDAR vs photogrammetry decision for NZ projects, choose drone LiDAR when you need ground levels under vegetation, such as native bush, forestry, scrub-covered slips or powerline corridors. Choose drone photogrammetry for open sites, earthworks volumes, progress reporting and anything that needs a true-colour image. On open ground, both reach centimetre-level accuracy when flown with RTK or PPK positioning.

Key takeaways

  • Drone LiDAR measures distance with laser pulses and can reach the ground through gaps in vegetation. Photogrammetry builds 3D models from overlapping photos and only sees the visible surface.
  • On open, well-textured ground, both methods typically achieve 1–3cm accuracy with RTK or PPK positioning.
  • Under vegetation, LiDAR is clearly more accurate. On open earthworks, photogrammetry is usually the more cost-effective choice.
  • Many New Zealand projects benefit from both: LiDAR for the terrain model and photogrammetry for the orthomosaic.

Who this guide is for: project managers, engineers, surveyors, councils, foresters and asset owners commissioning a drone survey in New Zealand. Who it is not for: hobby pilots choosing a consumer drone camera.

What is the difference between LiDAR and photogrammetry?

Drone LiDAR (Light Detection and Ranging) fires laser pulses at the ground and times their return to measure distance, building a 3D point cloud directly. Drone photogrammetry captures hundreds or thousands of overlapping photos and uses software to calculate 3D geometry from them.

The key difference is what each one can see. A single LiDAR pulse can return several echoes as it hits leaves, branches and finally the ground, so LiDAR can measure the terrain through gaps in the canopy. Photogrammetry can only model what the camera sees, so in bush or crops it maps the top of the vegetation, not the ground underneath.

LiDAR vs photogrammetry: side-by-side comparison

Drone LiDARDrone photogrammetry
How it measuresLaser pulses, timed returnsOverlapping photographs
Accuracy on open ground (with RTK/PPK)About 1cm horizontal, 1–3cm verticalAbout 1–3cm horizontal, 2–4cm vertical
Ground under vegetationYes, through gaps in the canopyNo, models the top of the vegetation
Thin objects (wires, poles, edges)StrongWeak
True-colour imageryNo, unless paired with a cameraYes, including orthomosaics
Light conditionsWorks in low lightNeeds even daylight; shadows and glare reduce quality
Ground control neededFewer pointsMore points or checkpoints
Relative costHigherLower
Best forBare-earth terrain, vegetation, corridorsOpen sites, volumes, visual records

Accuracy ranges are from RTK GNSS maker Emlid’s comparison of LiDAR and photogrammetry accuracy. Real results depend on flight height, sensor, ground control and site conditions.

Which is more accurate, LiDAR or photogrammetry?

On open, well-textured ground, LiDAR and photogrammetry are similarly accurate, both reaching centimetre-level results with RTK or PPK positioning and good ground control. The difference appears under vegetation, where LiDAR is clearly more accurate.

A 2026 study published in the journal Agronomy found LiDAR estimated canopy height with an error (RMSE) of 0.19–0.21m, compared with 0.52–0.60m for drone photogrammetry, because photogrammetry could not see into dense canopy. For earthworks, a study in the journal Drones found that once vegetation was filtered out, earthwork volume estimates from both methods landed within about 1% of ground truth.

In practice, accuracy depends as much on how the survey is flown and controlled as on the sensor. Ask any provider how they will verify accuracy, not just which sensor they will use.

Why does vegetation matter so much in New Zealand?

Vegetation matters in New Zealand because so many project sites are covered in it. Native bush, kānuka and mānuka scrub, gorse, plantation forestry and riparian planting all hide the ground from a camera.

Common New Zealand situations where this decides the method:

  • Slips and erosion in hill country: mapping slip scarps and debris under regenerating scrub, a frequent need after major storms.
  • Forestry: terrain models for roading, harvest planning and stream setbacks under pine canopy.
  • Subdivision and roading in bush blocks: design surfaces where the ground is not visible from above.
  • Riparian and wetland areas: ground levels under planting for flood and stormwater modelling.

In all of these, photogrammetry would model the vegetation surface rather than the ground, which can throw levels out by metres.

Which drone survey suits your NZ project?

Use this decision guide to match the method to your project type.

Project typeRecommended methodWhy
Earthworks and stockpile volumes on open sitesPhotogrammetryAccurate volumes at lower cost, plus a visual record
Construction progress reportingPhotogrammetryRepeatable orthomosaics show change over time
Bare-earth terrain under bush or forestryLiDARReaches the ground through gaps in the canopy
Slip, landslide and erosion mapping in vegetated hill countryLiDARMaps the ground surface beneath scrub
Powerline and vegetation clearance corridorsLiDARCaptures thin conductors and their distance to trees
Flood and stormwater modellingLiDARProduces a reliable digital terrain model (DTM)
Building, façade or heritage recordsPhotogrammetryHigh-detail, true-colour 3D models
Orchard and vineyard canopy structureLiDARMeasures canopy height and volume more accurately
Crop and plant healthMultispectral photogrammetrySpectral data that LiDAR does not capture
Large mixed sites (part open, part vegetated)BothLiDAR terrain plus a photogrammetry orthomosaic

What deliverables do you get from each method?

Both methods produce survey-ready outputs, but each has its strengths.

  • From LiDAR: classified point clouds (LAS or LAZ format), digital terrain models (DTM, ground only), digital surface models (DSM, including vegetation and structures), contours and canopy height models.
  • From photogrammetry: true-colour orthomosaics, textured 3D models, digital surface models, coloured point clouds and volume reports.
  • From either, after processing: CAD files for design software and GIS layers for mapping systems.

For New Zealand projects, confirm your deliverables use the national coordinate and height systems your designers expect, typically NZTM2000 coordinates and NZVD2016 heights, as defined by Toitū Te Whenua Land Information New Zealand (LINZ).

Do you still need ground control points?

Yes, in most survey-grade work. RTK and PPK positioning reduce the number of ground control points (GCPs) needed, especially for LiDAR, but independent checkpoints are still the best way to prove accuracy.

  1. Set control: place and survey ground control points across the site, especially at edges and elevation changes.
  2. Add checkpoints: survey extra points that are not used in processing, so accuracy can be checked independently.
  3. Fly with RTK or PPK: record precise drone positions during the flight.
  4. Process and report: compare the model with the checkpoints and report the measured accuracy with the deliverables.

Is LiDAR more expensive than photogrammetry?

LiDAR is usually more expensive than photogrammetry because the sensors cost more and the data needs more specialised processing. Photogrammetry only needs a survey-grade camera drone, making it the more cost-effective choice where vegetation is not an issue.

Cost should follow the question you need answered. Paying for LiDAR on an open earthworks site rarely adds value, while choosing photogrammetry for a bush-covered site can produce levels that are simply wrong. For mixed sites, flying both sensors in one mobilisation can be more economical than two separate surveys.

What should you ask a drone survey provider?

Use this checklist when commissioning a drone survey in New Zealand:

  1. Which sensor will you use, and why does it suit this site?
  2. What accuracy will you deliver, and how will you verify it with checkpoints?
  3. Which coordinate and height systems will the deliverables use?
  4. Which file formats will we receive (point cloud, DTM, orthomosaic, CAD, GIS)?
  5. Which Civil Aviation Authority rule part do you operate under, and does this site need any special approvals?
  6. What is your health and safety plan for the site, and what insurance do you hold?
  7. Where will our data be stored, and who owns it?

Safety and regulations

All commercial drone surveys in New Zealand must follow Civil Aviation Authority rules, and some sites need extra approvals, for example near aerodromes or controlled airspace. Survey flights over active construction or forestry sites also need a site-specific health and safety plan agreed with the site manager.

Cybotix builds and operates purpose-configured survey drones for LiDAR and photogrammetry, with PPK/RTK georeferencing and point cloud, DEM, orthomosaic, CAD and GIS deliverables. Because our hardware and software are engineered in-house, each platform is matched to the project’s accuracy, corridor length and terrain. See our drone surveying and mapping service and our range of drone payloads and sensors.

We also apply these methods across construction and infrastructure, conservation and environment and infrastructure inspection projects.

Frequently asked questions

Is LiDAR better than photogrammetry?

LiDAR is better for mapping ground levels under vegetation, thin objects such as powerlines, and work in low light. Photogrammetry is better for open sites, volumes and true-colour imagery, and it usually costs less. Neither is better for every project.

How accurate is a drone LiDAR survey?

With RTK or PPK positioning, drone LiDAR typically achieves about 1cm horizontal and 1–3cm vertical accuracy on open ground. Accuracy under vegetation depends on how many laser pulses reach the ground through the canopy.

Can photogrammetry see through trees?

No. Photogrammetry models only what the camera can see, so in bush, forestry or crops it maps the top of the vegetation rather than the ground. LiDAR is needed to measure the ground beneath a canopy.

Which method is best for earthworks volumes?

Photogrammetry is usually the most cost-effective method for earthworks and stockpile volumes on open sites. A study in the journal Drones found volume estimates from both photogrammetry and LiDAR landed within about 1% of ground truth once vegetation was filtered out.

Do I need ground control points for a drone survey?

For survey-grade work, yes. RTK or PPK positioning reduces how many ground control points are needed, but independent checkpoints are still the best way to prove and report accuracy.

Why is LiDAR more expensive?

LiDAR costs more because the sensors are more expensive and the point cloud needs specialised processing and classification. That cost is justified when the site is vegetated or the project needs a reliable bare-earth terrain model.

Can a drone survey use both LiDAR and photogrammetry?

Yes. Many projects combine LiDAR for an accurate terrain model with photogrammetry for a true-colour orthomosaic, and both can often be captured in a single site visit.

Plan your drone survey

Tell us about your site, its vegetation cover and the deliverables you need through our Contact Us page. Our drone division will recommend LiDAR, photogrammetry or a combined survey, and the accuracy you can expect.

Leave a Reply

Your email address will not be published. Required fields are marked *